HMI Proface PFXSTM6400WAD 7 inch
Display Type | TFT Color LCD |
Display Size | 7″ Wide |
Resolution | 800 x 480 pixels (WVGA) |
Effective Display Area | W154.08 x H85.92 mm [W6.066 x H3.382 in.] |
Display Colors | 16 million colors |
Backlight | White LED (Not user replaceable. When replacement is required, contact your local distributor.) |
Brightness Control | 16 Levels (Adjusted with touch panel or software) |
Backlight Service Life | 50,000 hrs. or more (each in continuous operation at 25 °C [77 °F] before backlight brightness decreases to 25%) |
Application Memory | When using BLUE:FLASH EPROM 128MB |
Removable System: No | |
Touch Panel Type | Resistive Film (analog, single-touch) |
Touch Panel Resolution | 1,024 x 1,024 |
Touch Panel Service Life | 1,000,000 times or more |
Serial (COM1) | Asynchronous Transmission: RS-232C / 422 / 485, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: None, Even or Odd, Data Transmission Speed: 2,400 to 115,200 bps, Connector: D-Sub 9 pin (socket) |
Ethernet (LAN) | IEEE802.3i / IEEE802.3u, 10BASE-T / 100BASE-TX, Connector: Modular jack (RJ-45) x 2 |
USB (TYPE-A) | Conforms to USB 2.0 (Type A) x 1 |
Power supply voltage: 5 Vdc ±5 % | |
Output Current: 500 mA or less | |
Communication distance: 5 m [16.4 ft.] or less | |
USB (mini-B) | USB 2.0 (micro-B) x 1, Communication Distance: 5 m [16.4 ft] |
Rated Input Voltage | 24 Vdc |
Input Voltage Limits | 19.2 to 28.8 Vdc |
Allowable Voltage Drop | 5 ms or less |
Power Consumption | (Rear module) Max. 6.8 W |
(Rear module)When power is not supplied to external devices: 3.5 W or less | |
(Display module) Max. 3.6 W | |
(Display module)When power is not supplied to external devices: 1.3 W or less | |
In-Rush Current | 30 A or less |
Voltage Endurance | 1,000 Vac, 20 mA for 1 minute (between power terminal and FG terminals) |
Insulation Resistance | 500 Vdc, 10 MΩ or more (between power terminal and FG terminals) |
Surrounding Air Temperature | 0 to 50 °C [32 to 122 °F] |
Storage Temperature | -20 to +60 °C [-4 to 140 °F] |
Ambient Humidity | 10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. – no condensation) |
Storage Humidity | 10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. – no condensation) |
Dust | 0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels) |
Pollution Degree | For use in Pollution Degree 2 environment |
Atmosphere | 800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less) |
Vibration Resistance | IEC/EN 61131-2 compliant |
5 to 9 Hz single amplitude 3.5 mm [0.14 in.] | |
9 to 150 Hz fixed acceleration: 9.8 m/s2 | |
X, Y, Z directions for 10 cycles (approx. 100 min.) | |
Concussion Resistance | IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z directions for 3 times |
Electrostatic Discharge Immunity | |
Contact Discharge Method: 6 kV | |
Air Discharge Method: 8 kV | |
(IEC/EN61000-4-2 Level 3) | |
Grounding | |
Functional grounding: Grounding resistance of 100 Ω, 2mm2 (AWG 14) or thicker wire, or your country’s applicable standard. (Same for FG and SG terminals) | |
Structure | Rear Module: IP20 |
Display Module: IP65F, UL 50/50E, Type 1, Type 4X (indoor use only), Type 12, Type 13 | |
Cooling Method | Natural air circulation |
Weight Approx. | Rear Module: 0.27 kg (0.6 lb) or less |
Display Module: 0.49 kg (1.08 lb) or less | |
External Dimensions | Rear Module: W145.6 x H108.23 xD 41.4 mm [W5.73 x H4.26 x D1.63 in] (excluding protrusions) |
Display Module: W140.4 x H101.1 x D13.9 mm [W5.53 x H3.98 x D0.55 in] (excluding protrusions) | |
Panel Cut Dimensions | Diameter 22.5 mm (0.88 in) |
Tham khảo các loại HMI phổ biến
Thương hiệu |
Proface |
---|---|
Thời gian bảo hành |
1 Năm |
Kích thước màn hình |
7 inch |
Series |
Proface STM6000 |
Báo giá & Tư vấn kỹ thuật |
Kentek Việt Nam cung cấp các loại HMI Proface chính hãng, bảo hành theo quy định nhà sản xuất, giao hàng toàn quốc, mua hàng liên hệ Hotline 0963 872 967 để được báo giá và tư vấn nhanh nhất.